KABA MAS Unicon DL20 - Multi-Use Cabinet Locks

Designed for new or replacement applications, the DL20 is ideal for locations that require access by multiple employees, assigning a unique User ID to each. Control door access to restricted areas and meet compliance requirements with the security and accountability provided by the DL20.
DL20 at a Glance
Power
Two CR-2 lithium 3v batteries in main housing.
Access Control
Users are assigned a 3-digit user ID and can select a unique 5-digit PIN. Use of PIN is optional, but is suggested for added security.
Access Users
Independent Mode: (1) Master User, (124) Access users
Supervisor/Subordinate Mode: (1) Master User, (3) Supervisors, (121) Subordinate access users.
Operating Modes
• Independent Mode: Master User adds individual access users to the lock.
• Supervisor/Subordinate Mode: Master User adds up to three supervisors, who then add or delete their direct subordinates to/from the lock.
Access Modes
• Single User: Entering one valid combination required to open lock.
• Dual User: Entering two valid combinations required to open lock.
Audit Trail
400 events (including opening and closing) stored in the lock with time and date stamp, can be downloaded to PC via a Dallas iButton Reporting (Red) Key Fob. (Requires Unicon Series
Software.)
Wrong Try Lockout
After five consecutive failed combination attempts, lock disables for three minutes. Additional consecutive failed attempts will result in another three minute penalty after each failed attempt.
Access Schedules
Can be set and maintained at the PC using Unicon Series Software and uploaded (transferred) to lock via Dallas iButton key fob.
Installation
Can be installed on 1 3/8" - 1 3/4" frame door.
Bolt Design
Spring bolt.
Keypad
Five button touch keypad accepts user commands and access combinations.
Economical Retrofit
Similar mounting hole patterns as the industry leading mechanical products, for ease of replacement in existing applications.
Mechanical Construction
Lock front - Black, injection-mold polycarbonate, 1.25" (31.71mm) x 5.63" (143 mm) x .85" (21.6 mm).
Turn knob - Black powder coat zinc diecast, clutch mechanism prevents opening of lock when over-torqued.
Back Chamber Assembly - Metal electro-mechanical assembly that includes motor and locking mechanisms - 3.75" (95.25mm) x 5" (127mm) x 1.5" (38.1mm).
Key Override (optional)
Key override sensor kit allows cabinet key to override lock and allow entry.
Uploadable Programming
Information can be loaded at the PC and transferred to the lock via a Dallas iButton Programming (Teal) Key Fob. (Requires Unicon Series Software.)
Compatible with Unicon CL Locks
The DL20 can be managed from the same Unicon Series Software as the Unicon Cabinet Locks (CL10, CL20).
Applications
• Narcotics Storage Rooms
• Liquor Supply Rooms
• Cleaning Supply Rooms
• Hazardous Materials Storage Rooms
• Employee Only/Restricted Areas
Accessories
• Unicon Series Software Implementation Package
• Reporting Key Fob (Red) for downloading data from lock
• Programming Key Fob (Teal) for uploading data to lock
• Lock covers